Stretch Required: Cutting the donor car in half, to make it longer so the body-kit fits.
No Stretch Required: The body kit bolts on to the donor car as is.
Donor Car: '91-'95 Toyota MR2 or any Pontiac Fiero.
No Stretch Required.
Includes: Fiberglass exterior body kit.
(Use the dash,console, and door panels from the donor car and have an upholstery shop recover these items in new black vinyl)
Buy this kit for only: $ 2995.
A donor car is defined as the car you donate to you Supercar replica project.
For this kit the donor car is the 1991-1995 TOYOTA MR2 or ANY Pontiac Fiero
Kit 355 No-Top Exterior Body-Kit: $2,995.00
-Add $505.00 if you want the Hard Top
We only sale the Fiberglass EXTERIOR kit in a Hard Top or No Top
You will use in interior from your donor car and make a few modifications.
NOTE: We are not associated with any of these companies/users on youtube, we post these videos for informational purposes only. We do upload videos, they are searchable under carkitinc on youtube.
To pull up all the YouTube videos on any given body-kit that you are interested in search these words on YouTube; for example: CarKitInc Mercy-2 or CarKitInc Ash-Mart or CarKitInc Mercy-1, basically just add what you are searching for after the tag “CarKitInc”.
Click HERE to view the shipping crate size and weight page.
The KIT 355 is designed to go on any FIERO however some people have made modifications to make the 1991 and up Toyota MR2 to work as the donor car.
THE REAL F355 VEHICLE HAS A WHEELBASE OF 96.5” AND IS 75” WIDE.
-THE 1991 TO 1999 TOYOTA MR2 DONOR CAR VEHICLE HAS A WHEELBASE OF 94.5” AND IS 66.9” WIDE; THEREFORE, THE F355 IS ONLY 2” LONGER ON THE WHEELBASE THAN THE MR2 AND THAT IS ONLY 1” PER WHEEL HOUSING AND WHEEL SPACERS MAKE THE MR2 TO BE 8” WIDER. YOU DO NOT HAVE TO STRETCH THE MR2 BECAUSE THE 1” DIFFERENCE ON EACH WHEELWELL HOUSING IS NOT NOTICABLE AND IF YOU WANTED TO CORRECT IT YOU CAN SIMPLY DO A LITTLE FIBERGLASS WORK TO ADJUST THE FIBERGLASS WHEEL WELL OUTER LIP 1” IN THE CORRECT DIRECTION TO ALIGN THE WHEEL WITH THE BODY. MOST PEOPLE DO NOT ADJUST THE WHEEL WELL HOUSING ON THE BODY KIT AND THEY ALSO DO NOT STRETCH THE DONOR CAR.
-ANY PONTIAC FIERO VEHICLE HAS A WHEELBASE OF 93.4” AND IS 69” WIDE; THEREFORE IT IS ONLY 3”
The pictures below show a completed KIT-355
The pictures below show the KIT-355 NO TOP VERSION body-kit
THIS YELLOW CAR ABOVE AND BELOW IS THE KIT-355 NO TOP VERSION.
RED KIT-355 NO TOP VERSION
We only offer the exterior body kit for the KIT-355 but you can reupholster the seats and door panels on the fiero and make the fiero interior work for the finished KIT-355.
• Front Fenders (L/R)
• Bumpers (F/R)
• Front Hood
• Rear Trunk Lid
• Left Door Skin
• Right Door Skin
• Left Door Rocker Panel(Is made into the bottom of the door)
• Right Door Rocker Panel(Is made into the bottom of the door)
• Outer Rear Tail-light Panel
• One-piece Rear Clip (L/R Qtrs and Roof)
Shipping the 355
Kit 355 being crated for shipment:
Note: The front bumper air-damn spoiler in the photos above actually go on the Mercy-4 and the front bumper air-damn spoiler for the Kit 355 is made on the kit-355 front bumper.
Note: the photos above are of the Kit 355 Hard Top version and we also offer a No Top version at no additional cost.
Also remember the kit 355 fits perfectly on a Fiero and is made for a Fiero donor car.